What spreader setting for EZ Seed?
Scotts ez seed patch and repair sun and shade is intended to be used as a patching product, but we do have a way that it can be applied by a spreader. Set the spreader to the highest setting available. New grass is growing well after just 14 days! New grass is growing well after just 2 weeks! I just sprinkled some miracle gro soil, then applied the ez seed.Customers say that Scotts EZ Seed Patch and Repair is an easy-to-use product that combines grass seed, fertilizer, and mulch in one container, making it convenient for patching bare spots in lawns. Many users report quick germination and successful growth, particularly in shaded areas.The Scotts EZ Seed is far and away the best one. Consistently produces healthy, thick grass, usually mowable after 2-3 weeks. All you need to do is keep it wet. No need for straw or any additional fertilizer.There are three easy steps to success: 1) prep the area by removing dead grass and loosening hard soil, 2) evenly apply EZ Seed® so the area is mostly covered but bare ground is still visible, and 3) saturate with water until no more water is being absorbed and seed turns dark brown.Answer: Scotts EZ Seed Patch and Repair Sun and Shade is a mixture of Fescue, Kentucky Bluegrass and Ryegrass.
How do I know what spreader setting to use?
If your spreader is not listed in our guide, use this rule of thumb to determine your lawn spreader settings: Place enough material in the hopper to cover 1,000 square feet. Place your spreader on a low setting (usually one-fourth of the spreader setting range or less). Use the Scotts® Turf Builder® EdgeGuard® DLX Broadcast Spreader to apply fertilizer, grass seed, and other lawn care products.To begin, turn rate control dial to the correct setting listed on the back of each Scotts® product, pour the product in the hopper, then start spreading. The lawn spreader’s design enhancements feature a curved hopper and dual-bladed agitator for smooth product funneling and consistent coverage.If your spreader is not listed in our guide, use this rule of thumb to determine your lawn spreader settings: Place enough material in the hopper to cover 1,000 square feet. Place your spreader on a low setting (usually one-fourth of the spreader setting range or less).To begin, turn rate control dial to the correct setting listed on the back of each Scotts® product, pour the product in the hopper, then start spreading. The lawn spreader’s design enhancements feature a curved hopper and dual-bladed agitator for smooth product funneling and consistent coverage.Answer: Scotts Turf Builder Classic Drop Spreader is designed to apply granular products, not soil. You may check with Scotts directly to see if they have a spreader you can use 888-270-3714.
What is the best temperature to spread grass seed?
Cool-season grass seed germinates best when soil temperatures reach 50 to 60 degrees Fahrenheit. This roughly corresponds to daytime air temperatures in the 60°F to 75°F range. An inexpensive soil thermometer, available at garden stores and online retailers, can help eliminate the guesswork. Plant seed in the spring or fall when daily average soil temperatures are consistently between 55°F and 70°F, or air temperatures between 60°F and 80°F. For best results, keep kids, pets, and lawn mowers off newly planted seedlings until the grass is 3 inches high.September is the perfect time to begin fall lawn fertilization. If it’s been a hot summer, your turf will thank you for an extra boost of nutrients. You can repeat your application at the end of October or early November to stimulate root growth before winter sets in.There are two times a year that are best for overseeding your lawn – in the fall between August and October and in the spring from March until Mid-June.For best results, lawn seed should be sown in spring (from March to May) or early autumn (September to mid October), when the soil is moist and warm.
What number to set spreader for grass seed?
Q: What is the best setting for grass seed? A: For most grass seed blends, 4-5 lbs per 1,000 sq ft is sufficient for overseeding. Seeding is the next step and should be applied at half the seeding rate that is used for new lawns on bare soil. For tall fescue, the normal rate is 6 to 8 pounds per 1000 square feet, so the overseeding rate is 3 to 4 pounds per 1000 square feet. This should be broadcast over the prepared area.Q: What is the best setting for grass seed? A: For most grass seed blends, 4-5 lbs per 1,000 sq ft is sufficient for overseeding. Set your spreader on a lower setting and go over the area twice in opposite directions for even coverage.RECOMMENDED SPREADER SETTINGS: Scotts Broadcast/Rotary Spreaders – Set to 8 for reseeding, set to 14 for New Lawn or Bare Spot Repair. Scotts Drop Spreaders – Set to 10 for reseeding, set to 15 for New Lawn or Bare Spot Repair.If your spreader is not listed in our guide, use this rule of thumb to determine your lawn spreader settings: Place enough material in the hopper to cover 1,000 square feet. Place your spreader on a low setting (usually one-fourth of the spreader setting range or less).
What fertilizer ratio is best for grass?
A good NPK ratio is 3-0-1 or close to it. Warm-season grasses should not be fertilized with nitrogen after mid-September since it can delay dormancy. For mid- to late-fall applications, use a high-potassium fertilizer with fast-release nitrogen for cool-season grasses. In most cases, however, a high-phosphorus starter fertilizer like 10-10-10, 20-10-10, or 16-8-8 should do the trick. Whatever you decide, make sure the product you’re using is suitable for the type of grass you’re planting. Pro tips: If you want to sow seeds, ensure the nitrogen and phosphorus levels are balanced.
What is the best setting for spreading grass seed?
As with the broadcast spreader, you’ll get the best coverage — and avoid striping — by setting your spreader at 50 percent, and then spreading your seed two ways in a crosshatch pattern. For best coverage, set the spreader at 50 percent, and then spread your seed two ways in a crosshatch pattern.
What is the best month to put down grass seed?
The best month to put grass seed down depends on the type of grass you have and where you live. The best time to plant grass seed for cool-season grasses is in early fall or around September. For warm-season grasses, late spring or early summer (May to June) is the optimal time. For best results, lawn seed should be sown in spring (from March to May) or early autumn (September to mid October), when the soil is moist and warm.Seeding in October is often possible, particularly if you live in the country’s southern half. Just look at the long-range forecast and make a decision. There can be a risk of poor germination, but if you have a bare or scarified lawn, it’s usually best to take the risk and seed.